Attention
1. You must be sure that your controller is the KT controller. Because this Kunteng LCD9 Display just compatible with the Kunteng controller. They have the same communication protocol.
2. The KT LCD 9 display is only suitable for standard plug KT controllers, not for KT waterproof controllers. Please check carefully before ordering.
Parameter
Type: KT-LCD9 TFT Display
Voltage: 24V,36V,48V
Color: Black
Weight: 250g
Handlebar size for holding:Φ22.2mm
Installation:Left / Right
Cable length: About 15cm(display). About 170cm (conversion wire) including the connector
Plug:6 Pin Connector
Function
1.Trip time display (with displays of a single trip time (TM) and total trip time (TTM));
2. Trip speed display (with displays of real-time speed (KM/H or MPH) and single maximum speed (MXS) and single average speed (AVS));
3.Trip distance display (with displays of a single trip distance (DST) and total trip distance (ODO);
4.Display of turned on the throttle (THROTTLE);
5.Display of power-assist startup (PAS);
6.Power-assist ratio (or throttle) gear (ASSIST) switch;
7.6KM/H power assistant push function;
8.Cruise function (CRUISE);
9. Battery capacity indicator ;
10.Real-time battery voltage (VOL) display;
11. Brake display ;
12. Turn on backlighting and lights ;
13.Data clearing;
14.Fault code display;
15. User parameter setting
16. 24V, 36V, 48V supply voltage can automatic identification and be compatible
Reviews
There are no reviews yet.