Ebike Intelligent Control Panel 24V 36V 48V KT LCD6 Display for Electric Bicycle

$49.60$51.30

Ebike Intelligent Control Panel 24V 36V 48V KT LCD6  Display for Electric Bicycle
Ebike Intelligent Control Panel 24V 36V 48V KT LCD6 Display for Electric Bicycle $49.60$51.30
  • Quality guarantee.
  • Easy returns.
Guaranteed Safe Checkout

emotoer-trust-symbols

  • 6km/h push funtion,Cruise function.head ligth,back lights, switching opitonal,brake status showing.
  • Torque sensor simulation speed sensor 0-5 level+ battery capacity showing.
  • 24V,36V,48V compatible.
  • Handlebar  size for holding: Φ22.2/Φ25.4/Φ31.8mm
 Ebike KT LCD6 Display 24V 36V 48V Intelligent Display Control Panel Display SM Waterproof 5 Pin Electric Bicycle Part

Type: KT-LCD6 Display
Voltage:24V,36V,48V
Color: Black
Weight:200G
Handlebar  size for holding:Φ22.2/Φ25.4/Φ31.8mm
Cable Length:About 165cm(SM),About 25cm(WP)including the connector
Switch button length:27cm
Plug:5 Pin Connector

Package Contents:
1 * Ebike Controller Display
Only the above package content and other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Important notice:

1. The KT LCD display can only match the KT controller. And our waterproof connector is Julet. Please check all the details(especially the connector) to make sure it could match your system.  Please make sure first.

2. SM Connector = 24V 36V 48V both compatible. Normal SM connector: Cable length about 165cm, could connect the controller directly.

3. WP Connector = 24V 36V 48V both compatible. Waterproof connector: Cable length about 25cm, can’t connect the controller directly. Need a 1-to4 Bus-cable.

 

Features:
1. Data display:it shows the riding speed, a single mileage, and cumulative mileage, riding time, power-
assist gear, motor power and temperature, battery voltage and charge status, brake status and the used
ambient temperature and other cycling parameters;
2. Intelligent power:a true reflection of the battery charge, real-time recording of the power
consumption to ensure riding mileage;
3. Stalls setting:multi-gear switch and automatic save of the power-assist gear, and it can restore
power-off stall state when turned on;
4. Parameter setting:with a number of user parameter setting functions, motor parameters, velocity
measurement parameters, speed-limit parameters, power parameters, power-assist control parameters,
the minimum controller voltage, and maximum current parameters and other operating models for
settings adjustment ;
5. Data view:Users can view historical driving data and clear accordingly, view single or cumulative
riding time, riding mileage, maximum speed and average speed of single riding;
6. Vehicle boosting:With 6Km/h power-assisting functions, the boost logo flashes during boosting, and
riders can use it when driving the vehicle and the vehicle driving is labor-saving and easy;
7. Cadence function:In the assistance mode, the display will show the pedal’s Revolutions Per Minute
(RPM);
8. Cruise and constant speed:With the setting and display of the cruise, achieving to automatically
maintain the vehicle speed so that the vehicle drives at a constant speed;
9. Night driving:With the functions of LCD backlit display and headlight switch control, instrument
backlighting and headlights can be turned on during driving at night;
10. Password setting:With three-bit of power-on password setting;
11. Automatically prompt:For the appeared failure of the vehicle, it can prompt different fault codes for easy inspection and maintenance of the vehicle. With a temperature display for motor operation and it is to
achieve the ultra-temperature alarm and motor protection;
12. Use five-line of digital communication, the instrument has good compatibility and interchangeability,
different instruments can be conducted the data exchanges and parameters copy directly;
13. Host part and operation buttons of the meter use sub-structure design, making the operation to be
more reasonable and convenient;
14. Supply voltage of 24V, 36V, 48V can be automatically identified and compatible;
15. Black and silvery-white housing;

KT-LCD6 User Manual

KT LCD Display Series

Compitable Electric Bike KT Controller

Electric Bicycle KT PAS 

Additional info

Weight 0.3 kg
Brand

Vehicle-type

Reviews

There are no reviews yet.

Be the first to review “Ebike Intelligent Control Panel 24V 36V 48V KT LCD6 Display for Electric Bicycle”