Electric Bike Display eBike LCD Display KT LCD3 For KT Controller
E-Bike Display Type: KT-LCD3 Display
Voltage:24V,36V,48V
Color: Black
Weight:200G
Handlebar size for holding:Φ22.2mm/Φ25.4mm
Cable length:About 165cm(SM),About 20cm(WP) including the connector
Switch button length:27cm
Plug:5 pin connector
There are four versions:
SM connector; WP connector, No USB Connector, With USB Connector.
Important notice:
1. The KT LCD display can only match the KT controller. And our waterproof connector is Julet. Please check all details(especially the connector) to make sure it could match your system. Please make sure first.
2. SM Connector = 24V 36V 48V both compatible. Normal SM connector: Cable length about 165cm, could connect the controller directly.
3. WP Connector = 24V 36V 48V both compatible. Waterproof connector: Cable length about 25cm, can’t connect the controller directly. Need a 1-to4 Bus-cable.
| FUNCTION： |
| 1. Data display： it shows the riding speed, a single mileage, and cumulative mileage, riding time,power-assist gear, motor power and temperature, battery voltage and charge status, brake status, and the used ambient temperature and other cycling parameters; |
| 2. Intelligent power： a true reflection of the battery charge, real-time recording of the power consumption to ensure riding mileage; |
| 3. Stalls setting：multi-gear switch and automatic save of the power-assist gear, and it can restore power-off stall state when turned on; |
| 4. Parameter setting： with a number of user parameter setting functions, motor parameters, velocity measurement parameters, speed-limit parameters, power parameters, power-assist control parameters, the minimum controller voltage, and maximum current parameters and other operating models for settings adjustment ; |
| 5. Data view： Users can view historical driving data and clear accordingly, view single or cumulative riding time, riding mileage, maximum speed, and average speed of single riding; |
| 6. Vehicle boosting： With 6Km/h power-assisting functions, the boost logo flashes during boosting, and riders can use it when driving the vehicle the vehicle driving is labor-saving and easy; |
| 7. Cruise and constant speed： With the setting and display of the cruise, achieving to automatically maintain the vehicle speed so that the vehicle drives at a constant speed; |
| 8. Night driving： With the functions of LCD backlit display and headlight switch control, instrument backlighting and headlights can be turned on during driving at night; |
| 9. Password setting： With a three-bit of power-on password setting; |
| 10. Automatically prompt： For the appeared failure of the vehicle, it can prompt different fault codes for easy inspection and maintenance of the vehicle. With a temperature display for motor operation and it is to achieve ultra-temperature alarm and motor protection; |
| 11. Use five-line of digital communication, the instrument has good compatibility and interchangeability, different instruments can be conducted the data exchanges and parameters copy directly; |
| 12. Host part and operation buttons of the meter use a sub-structure design, making the operation to be more reasonable and convenient; |
| 13. Supply voltage of 24V, 36V, 48V can be automatically identified and compatible; |
Ebike Display KT LCD Display Series
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Compitable Electric Bike Controller KT Controller
 |
 |
 |
 |
 |
 |
Electric Bicycle KT PAS
 |
 |
 |
 |
Reviews
There are no reviews yet.