Description
Left position installation instructions:
The installation of the KT-D12L power-assistant sensor doesn’t need to remove the crank,
and the sensor can be installed directly on the electric bicycle axle.
1.Fixing the sensor with a cable tie
2.Installation of magnetic steel plate dimension
3. Magnet plate assembly should plug the two pieces of magnetic steel plate according to the following diagram, which is then fixed by using a circlip.
Related Information
eBike Pedal assist sensor KT PAS Sensor Installation Guideline
1 review for Electric Bike Accessories 12 Magnets Pedal Assist Sensor KT-D12L