Ebike 36V48V 15A KT kunteng Controller for 250W/350W Motor

  • KT Series Controller: 6  mosfets 36V48V 15A for 250W/350W Motor.
  • Multiple protection: over-current, over-temperature, over-voltage, under-voltage, speed, lack of phase, protecting the safety of vehicle electronic control systems and traffic.
  • The KT controllers could work with most electric bike brushless motor with KT displays.
  • Please check the models carefully before ordering. 


In Stock


Electric Bicycle KT kunteng Controller 36V 48V 15A Controller for Ebike Twist Throttle with LCD Battery Display
Controller dimension: about 85*53*32 mm
Weight: 200g
Cable length :all about 10-13cm
Maximum current: 15±1A
Rated voltage: DC36V/48V
Speed set:1-4.2V
Rated current:7A
Brake input: Low-Level

Low voltage protection: DC30/40±0.5V

FUNCTION & PLUG (all bullet)

SM joint
motor (9pin waterproof plug )        power (red-black bullet plug)
display (5 pin SM plug)         throttle (3pin SM plug)
ebrake (3pin SM plug ) *2         PAS (3pin SM plug)
Waterproof joint

motor (9pin waterproof plug )           power (red-black plug)

1T4 cable plug(8pin waterproof plug-Throttle-Display-Ebrake)

PAS (Yellow-3pin waterproof plug)


1. KT controller is just only compatible with the KT display(same communication protocol). Please make sure that your system is the KT system. The waterproof connector is special that I can’t promise you it can be 100% compatible(because of the line sequence). But most can use it if you check carefully. Please check your motor cable if it is Julet or Higo 9pin waterproof plug(there are some letters on the connector ).Julet is better. But for 250W 350W. Higo is also OK.

2. If your ebrake throttle display and PAS light are all waterproof connectors. Please make sure the brand of your cable. Ours is Julet. YLS is also could be compatible. But HIGO can/’t be compatible. Please check before ordering it.

3. Please contact us if you have further questions.

KT LCD Display Series

Electric Bike KT Controller

Electric Bicycle KT PAS 

Additional information

Weight 0.3 kg



There are no reviews yet.

Be the first to review “Ebike 36V48V 15A KT kunteng Controller for 250W/350W Motor”

You may also like…