MUQZI Bicycle Bottom Bracket Install and Removal Tool axle Disassembly for BB86/30/92/PF30 Mountain bike road fixed gear
Applicable to a variety of press-in BB shaft specifications, installation, and disassembly as long as this group meets all needs (no bowl press).
Some aluminum sleeves are pressed into the middle shaft. When disassembling, there may be a problem that only the middle shaft bearing can be disassembled.
Because the force of the tool is on the bearing, the middle shaft of the aluminum sleeve may cause the bearing to come out first, and the aluminum sleeve also I bite on the frame, and the outer side edge of the middle shaft is parallel to the edge of the five-way frame.
Because the tool cannot be fixed at the five-way, the static pressure tool cannot be used.
Suitable for pressing and disassembling Palin specifications:
6805 (25X37X7) Palin
6806 (30X42X7) Palin
Press-in BB R92/T86
R30 (BB30 to BB24 converter)
Static press-in and disassembly of the PF30, bbright, bb386, etc. (Sram’s PF30 special center shaft).
Can be used for the removal and installation of press-fit center-shafts such as bb86, bb30, bb91, bb92, PF30.
It can remove almost all common hollow threaded shaft bearings and installation and disassembly of bb86, bb30, bb91, bb30 to 24, bb92 and other press-in center shafts.
Size: 115 * 17.5mm, please refer to the details
Net weight: 689.5g for starter / 786.7g for upgrade
Gross weight: 800g
Package size: 275 * 170 * 50mm
Reviews
There are no reviews yet.