KT display meter provides various functions and displays for controlling and monitoring bikes. Here are manuals for various different KT Displays.
KT Displays Manuals.
KT Display Features:
- Data display function: It has a display of riding speed, single mileage, and accumulated mileage, riding timing, power assisted gear, motor running power and temperature, battery voltage and State of charge, braking status;
- Intelligent power function: reflect the State of charge of the battery truly, record the power consumption in real-time to ensure the riding mileage;
- Gear setting function: Assists in multi-gear switching and automatic saving, and can restore the gear state when turned off when turned on;
- Parameter setting function: With multiple user parameter setting functions, it can adjust the operating modes such as motor parameters, speed measurement parameters, speed limit parameters, battery parameters, assistance control parameters, controller minimum voltage, and maximum current parameters for different vehicle models;
- Data viewing function: Users can view precise historical driving data, view single or cumulative cycling time, cycling mileage, etc;
- Vehicle Boost Function: With a 6 km/h assist push function, the assist sign flashes when pushing, which cyclists can use when pushing the vehicle. Vehicle push is labor-saving and easy to operate;
- Handle signal function: With built-in handle operation function;
- Cruise control function: it has the setting and display of cruise function to automatically maintain the vehicle speed and drive the vehicle at a fixed speed;
- Night driving function: With LCD backlight display and headlight switch control function, the display backlight and headlights can be turned on during night driving;
- Automatic prompt function: Prompts different fault codes for vehicle faults, facilitating vehicle inspection and maintenance;
- Adopting a five-wire digital communication method, the compatibility and interchangeability of the display are good, different displays can be directly interchanged and data parameters can be copied;
- The display host and operating buttons adopt a split mechanism design, making operation more reasonable and convenient;
- Power supply voltage 24V, 36V, 48V automatic identification, and compatibility.
- Password setting function: Provides three-digit startup password settings, and only LCD display can set parameters.
Ebike Display KT LCD Display Series
KT display Important Notice:
1. The KT LCD display can only match the KT controller. And our waterproof connector is Julet. Please check all details(especially the connector) to make sure it could match your system. Please make sure first.
2. SM Connector = 24V 36V 48V both compatible. Normal SM connector: Cable length about 165cm, could connect the controller directly.
3. WP Connector = 24V 36V 48V both compatible. Waterproof connector: Cable length about 25cm, can’t connect the controller directly. Need a 1-to4 Bus-cable.